Grand Slam Springless Post Driver

Everything you expect from a Shaver post driver except the springs, blocks or studs.

Ask any farmer or fencing contractor what the best post driver is, and they'll tell you, "Shaver." Perfect for any condition, from tough soil conditions to tricky side hills, our professional-grade post drivers are engineered for your most demanding jobs.



Drive anything from steel and wood posts to railroad ties. Up to 100,000 pounds of impact!


Just load the driver and go.


Drive a four- or five-inch post in 10-15 seconds.


Built to endure the toughest conditions; the Grand Slam will pay for itself. Plus, its self-contained power eliminates dirt and foreign material in the operator's skid steer loader's hydraulic system to save you maintenance costs.


Our commitment to safety shows through in every post driver we build. 

  • A rubber guard shields the operator from impact and any flying debris.
  • A standard stabilizer package provides greater stability during operation.
  • The safety arm securely positions posts in the driving ram.
  • Offset controls let the operator stand safely to the side of the driver.


I have owned several [Shaver post drivers] over the years throughout the history of our business. We started with the HD-10 and worked up through several HD-12s and finally when Shaver released the Grand Slam Springless Post Driver, we felt it was essential to the bottom line of our business, both from a speed standpoint and an efficiency standpoint. It allows us to get more work done in a days time.

Josh Arganbright, Arganbright Land Improvement - Iowa


Check out the media available for Grand Slam Springless Post Driver.


Josh Arganbright feels the Grand Slam Springless Post Driver is essential to the bottom line of his business.

Watch Video


Skid steer loader mounted; tractor mounted, front- or rear-mounted
Impact at Full Stroke 100,000 lbs.
Operating Distance Above Ground 53-128"
Maximum Post Width 10 7/8"
Maximum Post Length 10'
Tilt Front-back/side-side
With Hydraulic Base Plate 20 degrees/25 degrees
Category I, II or III Assembly Cat. II & III
Mounting Rear or skid loader
Hydraulic Requirements 15 GPM/2,000 PSI
Approximate Shipping Weight with Hydraulic Base 957 lbs.
The Positioners SB-22
Collapsed Width 92"
Extended Width 116"
Height 37 1/2"
Weight 861 lbs.
Swivel 0-155 degrees

The specifications for Grand Slam Springless Post Driver are subject to change without notice.